The G-floor

The G-floor


During the last years, the garage has become an important
extension of the house. More and more people remodel their
garage giving it a new purpose, for example transforming it into a
home office, a workshop, a music studio and even adding a new
room on top of it. If you are the type that needs to have a workshop
in his garage and you also want to park your car inside it you
definitely have to install a G-floor.

This type of flooring keeps your garage looking new whatever
activities you choose to do inside and also does a great job in
hiding cracks and stains while protecting the floor from oil, battery
acid, grease, brake fluids, salt, antifreeze, mud or other dirt that
finds its way into the garage. If you are living in a colder climate
, you definitely know what a mess winter snow and salt
make in your garage, this floor is easy to clean , you just have to
hose it off.

If you are thinking of remodeling your garage, you must consider the
option of installing a G-floor for several reasons: the coin-pattern
flooring is easy to install, rather cheap, durable and gives a great
look to your workshop-garage.

(word count 211)

PPPPP

Sealing a garage floor

Sealing a garage floor


The floor of your garage is exposed to intense corrosion
and deterioration due to road salt, oils and other auto fluids.
Sealing your garage floor reduces dust and makes
cleaning and sweeping easier. A clear acrylic concrete
sealer protects the concrete from damage and stains. Also
the same sealers can be used on concrete walks and
driveways or as a primer under acrylic or polyurethane
floor paints. You should take care when and where you
apply a sealer because they cannot be applied over paint or
other coatings.

In order to do the sealing yourself you need several
materials and tools: protective clothing, neoprene rubber
gloves, goggles, a stiff brush and a bucket, a paintbrush, a
cartridge-style respirator with organic-vapor and small-
particle filters, paint roller with extension handle and tray,
medium nap roller cover, a concrete degreaser and of
course some concrete sealer. Usually ½ gallon of sealer is
used for approximately 100 square feet.

Before sealing you have to clean the floor because it has to
be free of dirt, grease and oil. To do this you should use a
stiff scrub brush to apply the cleaner and concrete
degreaser according to the instructions. Allow the solution
to lay on the floor for 15 to 20 minutes more for stubborn
stains after scrubbing. After his you should rinse
thoroughly with clear water. You may need several
applications. Many concrete sealers contain hazardous
chemicals that may be harmful to skin and eyes and the
vapors are not safe to breathe but the vast majority are
acrylic. The best way to avoid damages to your skin, eyes
and lungs is to wear the protective equipment made of
neoprene rubber gloves, goggles and a respirator with both
organic-vapor and solid-particle filter cartridges. During
the process of sealing the floor you should continuously
ventilate the garage by opening all doors and windows and
also using a fan would be a great idea.

After cleaning and drying the concrete, the sealer has to be
applied. The sealer should be tested in an inconspicuous
area before applying. Some uneven density in the concrete
may result in light/dark appearance that may be
objectionable. By using the medium-nap paint roller with
extension handle is the easiest way to apply the sealer. Start
in a rear corner continuing to work your way out of the
garage. Before doing anything else you should allow the
sealer to dry as indicated on the sealer bottle, usually for a
few hours. For a driveway the procedure is essentially the
same but it would be quicker to use a garden sprayer to
apply the sealer to a large driveway. You should act with
caution not to over spray on other material due to the high
risk of staining.

(word count 459)

PPPPP

Safety A Garage Necessity

Safety A Garage Necessity


What do you see when you first examine a garage?

The garage door. This is the first and most important “contact” of
your garage to the world. If you want full confidence in your
garage, this “contact” should be 100% secure and safe. Also the
door says a lot of you and of your taste in design. You can have a
beautiful house but if your garage door is a wooden, plain,
white one with that makes an awful sound when opened or
closed, says a lot of you and your negligence regarding style and
safety.

An ageing garage door and opener could be a real threat for
your children or pets. Injuries and death are a thing of the past
with the new openers and garage doors. If you plan to remodel
your garage, one of the first steps in doing this must be changing
your doors and openers.

Old garage doors have been heavy, huge, wooden colossus that
rot and crack. Even though wooden doors provide a wide range
of styles and textures the problems related to poor insulation are
real and even of present times. An alternative is the fiberglass
material, inexpensive, easy to lift, resistant to corrosion and the
require little maintenance but they also provide little insulation
and security.

If you want a maintenance-free, durable and not-wrapping garage
door you need steel. They also provide good insulation, being
made of two or more sheets of steel alternating with a variety of
insulating materials. The also come in various textures, styles,
shapes and colors suited to your needs. Moreover, you can add
windows including the reflective type that provide an obscure
view into the garage.

In 1991, automatic reversal doors for garage door openers have
been required by law in the United States and in since 1993
optical sensors became a requirement. The sensor works perfect
for your safety: if something gets in the way of the sensor beam
while the door is going down, the sensor sends the door back up.
Also the new design provides more security and quieter
operation. Today, the silence options include a belt-driven trolley
made of Kevlar or, the cheaper option, a screw-drive model with
a plastic-lined track to lessen the noisy contact of metal-to-metal.

Remote controls have been upgraded so you can find a
remote control having enough buttons to control the lightening or
appliances in your home and garage. Another option for your
remote-control buttons are the child-safe lock-out and the rolling
security codes witch automatically change every time the garage
door opens to prevent the stealing of your opener’s code.

Even though you have all these changes added to your garage,
security and safety are not 100% guaranteed. It is better that the
installation of a new garage door and opener be done by a
professional team who can make the proper adjustments that will
allow the sensitive equipment to provide you with the maximum
amount of safety in your garage.

(word count 500)

PPPPP
garage